UV-LED for printing UniJet Series

    Recommended for pinning curing to 3D printers.
    Both the standard type (Sd) and high power type (Hi) have significantly improved light distribution uniformity for the connection
    with compactness, lightweight, and UV power remained the same, which makes printer value improvement happen.
　
    F e a t u r e s
 　 1. Both HD type and HC types are prepared based on the very popular product lineup.
 　 2. 10% - 100% dimmable.
 　 3. Scalable by edgeless design.
 　 4. Built-in LED driver.
   
 

                   
                                E series（Gen２） 

E series（ GEN2） Standard type		E075Sd HD	E110Sd HD	E075Sd HC	E110Sd HC
Cooling method		Air-cooling
Window Size (mm)		75×17	108×17	76×φ10	109×φ10
Width (mm)		78	111	78	111
Length (mm)		33
Height (mm)		134.5		143.2
Peak Irradiance (W / cm2)	365nm	8.4（WD=0mm）/3.5（WD=5mm）＊1		6.0（WD=10mm）＊1
	385nm	10.8（WD=0mm）/4.6（WD=5mm）＊1		7.2（WD=10mm）＊1
	395nm	12.1（WD=0mm）/5.1（WD=5mm）＊1		8.5（WD=10mm）＊1

 

E series（ GEN2） High power type		E075Hi HD	E110Hi HD	E075Hi HC	E110Hi HC
Cooling method		Air-cooling
Window Size (mm)		75×17	108×17	76×φ10	109×φ10
Width (mm)		78	111	78	111
Length (mm)		33
Height (mm)		134.5		148.8
Peak Irradiance (W / cm2)	365nm	7.1（WD=0mm）/ 5.0（WD=5mm）＊1		5.2（WD=5mm）＊1
	385nm	8.1（WD=0mm）/ 5.3（WD=5mm）＊1		6.4（WD=5mm）＊1
	395nm	9.1（WD=0mm）/ 6.0（WD=5mm）＊1		7.2（WD=5mm）＊1
	405nm

　　　　　　　　　　　＊   A single power supply is also available as an option.　　　　　           　　　　　
　　　　　　　　　　　＊1 Reference value based on measurement by USHIO.　
　　　　　　           　　　　

      The air-cooling model where the split lighting control function is added.
　Contribute to the unusual printer design by various irradiation pattern in one LED unit.
   　
    F e a t u r e s
 　  １.  High irradiance : Up to 16W/cm².
　  ２．10% - 100% dimmable.
 　 ３．Scalable by the edgeless design.
 　 ４．Built-in LED driver.
　   5.    Makes energy saving and fine curing control happen by the optimum light distribution 
             from individual lighting, dimming, and on/off control by LED board.
　   6.    Replaceable UV-LED board.
   

                              i / i Ⅱ series　

i / iⅡ series		i60Ⅱ	i80 i80Ⅱ	i120Ⅱ	i185 i185Ⅱ	i245 i245Ⅱ	i310 i310Ⅱ	i370 i370Ⅱ	i430 i430Ⅱ	i495 i495Ⅱ
Cooling method		Air-cooling
Window Size (mm)		65.8 ×25	82.4 ×25	125.6×25	185.4 ×25	247.2 ×25	309 ×25	370.8 ×25	432.6 ×25	494.4 ×25
Width (mm)		67.8	127.6		187.4	249.2	311	372.8	434.6	496.4
Length (mm)		89
Height (mm)		249.2
Peak Irradiance (W / cm2)	365nm	10.0（WD=0mm）/ 8.4（WD=5mm））＊1
	385nm	iⅡseries : 16.0（WD=0mm）/ 13.0（WD=5mm）＊2
	395nm
	405nm

　　　　　            　　　　　＊1 Reference value based on measurement by USHIO.　　
　　　　　            　　　　　＊2 Reference value based on measurement by USHIO at 395nm.
　　　　　　　            　　　＊ Power supply box cannot be used up to i120Ⅱ.

     The air-cooled industry smallest and lightest model for final cure.
　Contribute to reduction of the size and weight for the ink head, and reduce the burden to the moving drive.
   　
    F e a t u r e s
 　   1.  High irradiance : Up to 18W/cm²
      2. Industry's smallest model.
      3. 10% - 100% dimmable.
      4. Scalable by edgeless design.
      5. Built-in LED driver.
      6. Replaceable UV-LED board.
   

 

                                iC series　

iC series		i075C	i150C	i225C	i300C	i375C
Cooling method		Air-cooling
Window Size (mm)		73 ×29	148 ×29	223 ×29	298 ×29	373 ×29
Width (mm)		78	152	227	302	377
Length (mm)		60
Height (mm)		230
Peak Irradiance (W / cm2)	365nm	12.0（ WD=0mm）/ 9.5（ WD=5mm）＊1
	385nm	16.5（ WD=0mm）/ 13.0（ WD=5mm）＊1
	395nm	18.0（ WD=0mm）/ 14.5（ WD=5mm）＊1

　　　                      　　　　＊1 Reference value based on measurement by USHIO.

     WD-free air-cooled high-intensity and high dosage model with silent operation design.
   　
    F e a t u r e s
 　 1. Achieved approx. 17W/cm² at WD 5mm.^＊1
     2. Achieved approx. 140% increase of dosage than iⅡ series.
     3. Less than 20% irradiance drop up to WD 15mm.
     4. Quiet design.
     5. 14% - 100% dimmable.
     6. Built-in LED driver.
     7. Replaceable UV-LED board.

   

 

                         　　   iⅢ Series

iⅢ series		i075Ⅲ	i150Ⅲ	i225Ⅲ	i300Ⅲ	i375Ⅲ	i450Ⅲ	i525Ⅲ
Cooling method		Air-cooling
Window Size (mm)		75×40	150×40	225×40	300×40	375×40	450×40	525×40
Width (mm)		77	152	227	302	377	452	527
Length (mm)		136
Height (mm)		343
Peak Irradiance (W / cm2)	385nm	14.9（WD=0mm）/ 15.3（WD=5mm）＊2
	395nm	16.6（WD=0mm）/ 17.0（WD=5mm）＊2

                                     ＊1 Available for 385nm and 395nm.　　　　　　　           　 
                                     ＊2 Reference value based on measurement by USHIO at 395nm.

     Air-cooled top-end model enhancing high illuminance, high dosage, and quietness.
    Make energy saving and downsizing of the equipment happen by replacing the water-cooled type or conventional lamp.
   　
    F e a t u r e s
 　1. Achieved approx. 18W/cm² at WD 5mm ^＊1
    2. Achieved approx. 240% increase of dosage than iC series.
    3. 25% more compact than iⅢ.
    4. 25% lighter than iⅢ.
    5. Quiet design.
    6. 15% - 100% dimmable.
    7. Built-in LED driver.
    8. Replaceable UV-LED board.

                              iⅣ Series

iⅣ series		i075Ⅳ	i150Ⅳ	i225Ⅳ	i300Ⅳ	i375Ⅳ	i450Ⅳ	i525Ⅳ
Cooling method		Air-cooling
Window Size (mm)		75×52	150×52	225×52	300×52	375×52	450×52	525×52
Width (mm)		77	152	227	302	377	452	527
Length (mm)		136
Height (mm)		256.4
Peak Irradiance (W / cm2)	365nm	13.5（WD=0mm）/ 13.0（WD=5mm）＊2
	385nm	17.0（WD=0mm）/ 16.0（WD=5mm）＊2
	395nm	19.5（WD=0mm）/ 18.5（WD=5mm）＊2

　　    　　　　　    ＊1 Available for 395nm
　　　　　　　        ＊2 Reference value based on Ushio measurement.

     High-power and space-saving water-cooling model.
   　
    F e a t u r e s
 　1. Achieve high illuminance of 21W/cm².
　 2. Various lineup to meet a variety of paper widths.
    3. Compact design than UV lamp.
　 4. Also curable with UV lamp ink^＊1
　 5. Split irradiation possible.
    6. 10% - 100% dimmable.
    7. Built-in driver.
    8. UV-LED board replaceable.

 

 　　　　　　　　 Ai Series

 

Ai series		A075i	A150i	A225i	A300i	A375i
Cooling method		Water-Cooling
Window Size (mm)		85×27	160×27	235×27	310×27	385×27
Width (mm)		175	250	325	400	475
Length (mm)		50
Height (mm)		212
Peak Irradiance (W / cm2)	365nm	15.0（WD=0mm）/13.0（WD=5mm）＊2
	385nm	21.0（WD=0mm）/18.0（WD=5mm）＊3
	395nm

　　　　　　　       　 ＊1 The results are based on experimental data, so final confirmation by the customer is required.
　　　　　　　       　 ＊2 Typical value based on our measurement standards
　　　　　　　       　 ＊3 Typical value based on our measurement standards at a wavelength of 395 nm.

     High power and small water cooling model for final cure.
　Even if installed near the ink head, no cooling airflow will have an unfavorable effect on the ink printability.
   　
    F e a t u r e s
 　1. Achieve high illuminance of 24W/cm² (WD = 5mm).
    2. Achieve 210% higher UV dosage than the A series. 
        Contribute to further ink diversity and printing speed increase.
    3. Compact design than UV lamps.
    4. Addition of optional units allows window width to be increased up to 80mm.
    5. Split irradiation possible.
    6. 10% - 100% dimmable.
    7. UV-LED board replaceable.
 　

 

                                AHD Series

AHD series		A360HD	A450HD	A540HD
Cooling method		Water-cooling
Window Size (mm)		362×48	451×48	539×48
Width (mm)		410	500	590
Length (mm)		120
Height (mm)		120
Peak Irradiance (W / cm2)	395nm	24.8（WD=0mm)　23.4（WD=5 mm）＊1

　　　　　　　　            ＊1 Reference value based on measurement by USHIO.

     A new product specialized for seal and label printing is now available.
    Greatly contribute to UV-LED conversion of your intermittent letterpress and offset presses.
　
    F e a t u r e s
    1. 20% more compact than iCC.
    2. Mirror (reflector) can be newly mounted or removable.
    3. 16% higher UV dosage than iCC.
    4 . Easy window glass and filter replacement.
    5. No gap structure (reduce foreign matter contamination).
    6. Split irradiation possible.
    7. 10% - 100% dimmable.
    8. Replaceable UV-LED board

   

                   
                               Ｓ Series

Ｓ Series		S240_S	S300_S	S360_S
Cooling method		Air-cooling
Window Size (mm)		254×44	314×44	374×44
Width (mm)		515		565
Length (mm)		158
Height (mm)		275 (irradiator : 220 + aperture : 15 + bottom plate : 40)
Peak Irradiance (W / cm2)	385nm	10.6 (WD＝10mm) / 3.5 (Mirror)＊1

                                       ＊1 Reference value based on measurement by USHIO.

  ② iCC Series 　

    Ideal for letterpress/offset, intermittent and rotary presses
    Suitable for printing machines with operator-friendly exhaust structure, cable positions, etc.
   　
    F e a t u r e s
 　1. Operator-friendly intake and exhaust design.
　 2. Light-shielding bottom plate type.
　 3. Easy-to-handle cable.
　 4. 10% - 100% dimmable.
    5. Built-in LED driver.
　 6. Replaceable UV-LED board.
   
 

                               iCC Series　

                                  

iCC Series		i225CC_S	i300CC_S	i375CC_S	i525CC_N	i600CC_N
Cooling method		Air-cooling
Window Size (mm)		223×29	298×29	373×29	523×29	598×29
Width (mm)		416	491	566	716	791
Length (mm)		150
Height (mm)		458			378
Peak Irradiance (W / cm2)	385nm	16.5（WD=0mm）/ 13.0（WD=5mm）＊1

                                         ＊1 Reference value based on measurement by USHIO.

   Compatible structure with UV lamp.
   It is the product where the voices of the customer have been reflected such as stylish appearance, operator friendly exhaust structure, duct option
   in addition to the improved curing performance by the wide irradiation. 　

    F e a t u r e s
  　1. Compact design with 120 by 120mm which size is equivalent as the conventional lamp.
 　2. Air intake and exhaust structure considering the printing work environment.
 　3. High UV dosage.
 　4. Exhaust duct can be mounted.
 　5. 10% - 100% dimmable.
 　6. Replaceable UV-LED board.
   

 

                    W Series

W Series		W330
Cooling method		Air-cooling
Window Size (mm)		340×60
Width (mm)		468.9
Length (mm)		120
Height (mm)		120
Peak Irradiance (W / cm2)	385nm	6.0（WD=10mm）＊1

    　　　　　　        　　＊1 Reference value based on measurement by USHIO.

  Equipped with an original mirror unit that enables uniform UV irradiation over a wide area!
  Ideal for container printing such as cups and other containers.
   　
    F e a t u r e s
 　1. Suitable for curved design substrate (Container, etc).
    2. Mirror unit allows uniform UV irradiation. Over a wide area. (WD=40mm : Irradiation 86mm)
    3. 10% - 100% dimmable.
    4. Built-in LED driver.
    5. Replaceable UV-LED board.
    6. Maximum 2 units can be connected with one integrated mirror.


  

 
                         　   iⅡR Series

iⅡR Series		i185ⅡR	i245ⅡR	i310ⅡR	i185ⅡR-2	i245ⅡR-2	i310ⅡR-2
Cooling method		Air-cooling
Window Size (mm)		184.8×69	246.6×69	308.4×69	372.2×69	395.8×69	619.4×69
Width (mm)		233.4	295.2	357	420.8	544.4	668
Length (mm)		305.6
Height (mm)		103.5			113.5
Peak Irradiance (W / cm2)	385nm	2.0（WD=10mm）※1

　　　　　  　          　　＊1 Reference value based on measurement by USHIO.

    The industry's highest-quality high-illumination model.
   Ideal for business form printers, flexo printers, and other high-speed printers.　
   　
    F e a t u r e s
     1. High irradiance : Up to 24W/cm² 
     2. Various lineup for any paper size.
    3. Light-shielding bottom plate type.
    4. Compact design as compared to UV lamps.
　 5. Irradiation zone control.
    6. 10% - 100% dimmable.
    7. Replaceable UV-LED board.
　　　　　　　　

　　　　　　　  A Series

A Series		A180	A270	A360	A450	A540
Cooling method		Water-cooling
Window Size (mm)		180×26	270×26	360×26	450×26	540×26
Width (mm)		230	320	410	500	590
Length (mm)		80
Height (mm)		111.5
Peak Irradiance (W / cm2)	385nm	Full ：21.0 (WD=0mm) / 18.0 (WD=5mm)＊1 Half：10.5 (WD=0mm) / 9.0 (WD=5mm)＊1

　　　　　            　　＊1 Reference value based on measurement by USHIO